X-35
Our X-35 sails feature the Contender
MAXX fabric in Carbon fiber-Kevlar, for top performance
and reasonable durability. WB-Sails has collaborated with
Contender in the development of the MAXX-concept.
The all-purpose mainsail is equipped with two reefs. It
has enough luff curve to allow for backstay tension as the
wind builds up, but not too much to prevent depowering
in a stiff breeze.
There are two full-size jibs: Light-medium
(LM) for less than 18 kn apparent, medium-heavy (MH) for
up to 28 kn apparent wind. The HW jib is smaller in area
and conforms with the ORC heavy weather jib regulations.
We offer three spinnakers in standard. The VMG
is optimized for light airs and windward-leeward courses,
cut in Contender Superkote/Superlite Nylon. It is slightly
narrower in the head and a little smaller than maximum area.
The all-purpose spinnaker (AP) features an elliptical cross
section in the top part, projecting the wide shoulders. It
is max. area for the rule and suits best for running in medium
to heavy winds. The reacher (RC) is smallest in area, has
a small head angle & narrow shoulders, best for heavy
air reaching and running in over 30 kn of wind.
Our
unique DynaSim
software was used in the development
of the all the spinnakers.
All sails are in accordance with the X-35 OD-rules and come
measured with the class stickers.
| X-35 sail pricelist 1.1.2010 |
| Mainsail |
7 570 euro |
| Jib Light #1 |
3 920 euro |
| Jib Medium #2 |
5 050 euro |
| Jib Heavy #3 orc |
4 990 euro |
| Spinnaker Light |
3 230 euro |
| Spinnaker AP |
3 050 euro |
All prices ex.
works in Helsinki, incl. VAT 22%.
Call
+3589 621 5055, or E-mail for
more info.
|
